Before first use – GEVI

Check accessories

Unpack the product and make sure you have received all the accessories. If anything is missing, please contact Customer Service. service@gevi.com

Placement requirements
- Place on a Stable Surface: Ensure the ice maker is on a dry, level surface, away from heat sources like ovens or heaters, and avoid exposure to corrosive gases.
- Allow Space: Leave at least 6 inches of clearance on all sides for proper ventilation.
- Wait Before First Use: Let the ice maker sit upright for 2 hours before using it for the first time.
- Limit Tilt: Keep the ice maker’s incline angle below 45° during transport or use.
- Don’t Flip: Avoid turning the ice maker upside down, as this can affect the compressor or cooling system.
- Settle Time After Moving: After moving the ice maker, wait a while to allow the compressor fluids to settle.

Temperature requirements
- Operating Temperature: Use the ice maker in environments between 50°F (10°C) and 90°F (32°C).
- Avoid Extreme Cold: Don’t use the ice maker in environments below 41°F (5°C).
- Water Temperature: For making ice or cleaning, use water between 46°F (8°C) and 82°F (28°C).

Discard the first batch of ice

Before your first use, add water to the side tank, start the ice-making cycle, and discard the initial batch of ice, this helps to ensure the best taste.

Check accessories