Admin
- Total activity 33
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 18
Articles
Recent activity by Admin-
Control Panel
2 Buttons : START button, CLEAN button 4 indicator lights : Making ice, cleaning, add water , ice full START Button Press the button to make ice or cancel making ice The button cannot cut o...
-
Control Panel
2 Buttons : On/Off button, Clean button 4 indicator lights : Making ice, cleaning, add water , ice full On/Off Button Press the button to make ice or cancel making ice The button cannot c...
-
Before first use
Check accessories Unpack the product and make sure you have received all the accessories. If anything is missing, please contact Customer Service. service@gevi.com Placement ...
-
Before first use
Please leave the ice maker upright more than 4 hours after unpacking. Take out the accessories from the ice basket. Please plug in correct power supply. For better ventilation, please leave 6 inch...
-
Two ways of adding water
1, Auto-fill water Automatically add water by connecting tap water with the 10ft 1/4" hose (included in the package). Insert one end of it into the water inlet and connect the other end to water ta...
-
Maintenance
Clean your ice maker Please clean your ice maker per week. Clean the inside of the ice maker with a soft cloth soaked with warm water. Add about 2 L of clean water, press and hold the cleaning but...
-
Trouble shooting-leaking
If your ice maker leaks, please stop using it and proceed with inspection. Please unplug the power Please check if you added too much water that pour out from the reservoir, water should be less...
-
Trouble shooting-wrong status of add water indicator light
The indicator is light on even there is enough water in reservoir. Please check if there is anything blocking the filter screen in water reservoir. Please check if there is anything blocking th...
-
Trouble shooting-wrong status of ice full indicator
The ice full indicator light is light on even there is no ice in basket. Please unplug the power, check if there is any matter in the ice outlet, which may hinder the sensor. If yes...
-
Trouble shooting-noise
Resonance noise The reason for the noise is likely due to a large gap between the front shell and the back shell of the machine, which causes resonance during ice making. To solve the issue, it's ...